***WARNING*** Demand of our products increases this time of year. ORDER EARLY.


Gold Hog Highbanker / Dredge / Sluice

Self Classifying - Multi-Level - Stackable - Gas or Electric - Convertible
Patent Pending

The Gold Hog ™  ,tough as a Wild Boar, hungry as a PIG, compact and willing to take on any dirt you feed it.

The Gold Hog  Combination Highbanker, Dredge and Concentrator is the next generation in gold processing and prospecting.  It is truly one of the most versatile units on the market.
The Gold Hog bridges the steps between recreational prospecting and large scale mining. The machine is designed to handle HUGE amounts of material without the need for classifying.

Available Late March 2012

Just Released...
The field test and use video...
(See Chapter Breakdown Below)


Begin: Intro to the Gold Hog Highbanker...
8:38 - Critical Points about our mattings...
16:38 - Like Gems??? Custom Mod
21:29 - Skimming Tray Understanding...
27:35 - Set Up in the field...
38:46 - Timed run of ONE TON of material...
47:14 - Shut down and quick clean...
54:42 - Running Electric...
55:42 - Dredging and highbanker at the same time...
1:03 - Some of the gold and some history of location...
1:12 - Tour of Gold N Gems in Georgia...
1:19 - Looking at the cons and gold...

Watch the video below.
Full version now up as well.


The FULL Version of the Product Video 47 minutes.


Technical Specs and Information

Total Weight: 36 lbs with all trays and legs.

Width: 10" (Trays fit inside 5 gallon bucket for easy cleaning.)

Height: Varies with set up. Tallest is with all trays and header box. Approx 39"

Sluice Processing Area: 80" of active matting surface with 3 trays, plus 30" of slick plate / skimming area.

What's Included?

- All three processing trays.

- Skimming tray.

- Header box with melting tray and kick plate. 

- One main water feed attachment with 2 fittings. 2" and 1.5" (pvc)

- Two barbed 1-1/8" bilge pump hose attachments.

- Legs with swivel brackets.

- Several matting choices included.
1 UR Mat
2 Scrubber Mats
2 Large Faced Vortex Mats.

Special Notes

Custom Made for You...
These units are NOT, mass produced.
Each unit is custom made as they are ordered. We have a high-tech machine shop, located in GA, that plasma cuts the units based on specific computer diagrams and does the basic manufacturing. Once we receive the unit from them into our shop, over 4 hours of finishing labor begins. Each unit is inspected boxed and shipped. Estimated order time is 10 - 14 business days.

Simplicity is Key...
We constantly REMOVED items that often cause problems in the field or on long trips. Simple plumbing can be replaced at any hardware store if needed. A simple $10 rivet gun can be carried on long outings if any repairs are needed. 
Initially the unit was welded, which made no sense to us. Not many people can weld aluminum if a repair is needed. 

Designed for VERY high output / processing levels.
A test run, with 3 men and one shovel, was able to process 5.5 TONS of material in just 4 hours.


   Estimated Cost

Even with limited production, large amount of aluminum used, and extensive labor involved, the unit is still priced near most entry level highbanker units.
We estimate the price will be $1295 plus shipping.

If you wish to reserve a unit, please use the contact form and let us know of your interest.










Gold Hog Dredge - Gold Hog Sluice




Sell Placer Gold

Join Us




Copyright 2011 - 2015 ~ All Rights Reserved ~ www.GoldHog.com

Gold Hog is a registered trademark.